LFK LINEFLEX Coupling

LFK LINEFLEX Coupling

This ‘pivoting’ Link-pairs (each at 90°) Coupling (interchangeable with the SEMIFLEX), compensates for all forms of shaft misalignment; a torsionally-stiff, true constant velocity, precision shaft connector. It accommodates ‘bedding down’, assembly, manufacturing tolerance, wear & specific operation alignment limitations. Angular velocity of connected shafts remains totally synchronised irrespective of misalignment and no restoring reaction forces are induced to load the support bearings. There are ‘Short’ length (…’K’), ‘High Torque’ (…/4), or pre-loaded bearing versions and even quill shafts can pass through the middle of the coupling.

Applications include: Printing, Packaging & Mechanical handling machines, Testing units and Machine tools.

Shaft connections are via: (Std.) Flanged, or Bossed End Discs.

Finish bored & Keywayed Counter-Flange Hubs for bolting to the A1 Coupling Flanged Ends can also be supplied.

 

The range accommodates Offests & Torques between:
  • ‘0’ (in-line) to +/- 2mm; TKN=37Nm (Datum); for the Smallest, up to
  • ‘0’ (in-line) to +/- 13mm; TKN=28,350Nm (Datum), for the Largest.

LFK LINEFLEX Coupling

Click to view a PDF

LFK LINEFLEX Coupling

Click to view a video

Poggi
KBK
Inkoma
Capton Division
Lonertia