ELAFLEX Coupling

ELAFLEX Coupling

Simple 3-component, Flexible Elastomer ‘Spider’ shaft connector, available in 3 versions; Standard type ‘EKF’, Externally-fitted/removed-Spider (wrap-round) type ‘EFG’ & Spacer version, type ‘EFL’ – each with either 80°, or 90° shore hardness ‘Spiders’.

Universal Applications for minor shaft misalignment compensation [Angular (up to 1°), radial (up to +/-0.15mm)]. Hub material is Sintered, GG Cast Iron, Aluminium, or Steel, providing a positive, relatively stiff, fail-safe drive (in either direction), with vibration damping & shock absorption.

The hard wearing, simple & economically replaceable ‘Spiders’ are oil & ozone resistant, withstanding temperatures from -40° to +100°C.

The Range offers:
  • Maximum Transmission Torques (TKmax): Up to 818Nm,
  • Maximum Speeds: Up to 10,000 RPM [Steel, or SG iron Hubs for over 30m/sec. peripheral velocity]
  • Hubs: Pilot, or finish bored (H7), (keywayed to DIN 6885/1). up to Ø60mm.

ELAFLEX Coupling

Click to view a PDF

ELAFLEX Coupling

Click to view a video

Poggi
KBK
Inkoma
Capton Division
Lonertia